JANOME JW5622 Livret d'instructions télécharger pdf (Page 10)

8

v

n

m

Winding the Bobbin

z

Pull the handwheel out.

x

Draw the thread from the spool.

Guide the thread around the bobbin winder

thread guide.

c

Insert the thread through the hole in the bobbin

from the inside to the outside.

Put the bobbin on the bobbin winder spindle.

v

Push it to the right.

b

With the free end of the thread held in your

hand, depress the foot control.

Stop the machine when it has made a few

turns, and cut the thread close to the hole in

the bobbin.

n

Depress the foot control again.

When the bobbin is fully wound, stop the

machine.

Return the bobbin winder spindle to its original

position by moving the spindle to the left, and

cut the thread.

m

Push the handwheel back into the original

position.

NOTE:

Return the bobbin winder spindle to the left

when the bobbin winding is ﬁnished.

Threading Bobbin Case

z

Place the bobbin into the bobbin case.

Make sure the thread unwinds in the direction

of arrow.

x

Pull the thread into the bobbin case slot.

c

Draw the thread under the tension spring and

into the delivery eye.

* Leave about 10 cm (4˝) of free thread.

z

b

z

x

c

c

x

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire